DJI M600 Pro - The Industrial Hexacopter
"SIMPLY PROFESSIONAL PERFORMANCE"
The Matrice 600 Pro (M600 Pro) inherits everything from the M600 with improved flight performance and better loading capacity.Pre-installed arms and antennas reduce time required for setup, and the system’s modular design makes it easy to mount additional modules.The airframe is equipped with the latest DJI technologies, including the A3 Pro flight controller, Lightbridge 2 HD transmission system, Intelligent Batteries and Battery Management system. All Zenmuse cameras and gimbals are natively compatible and full integration with third party software and hardware make the M600 Pro ideal for professional aerial photography and industrial applications.
The DJI M600 Pro is the new industrial hexacopter from DJI.
The key features of this powerful aerial platform include pre-installed arms and antennas, modular design to make upgrades / modifications easy, improved flight time over the standard M600, the A3 pro flight controller, the Lightbridge 2 HD transmission system, support for 6 intelligent batteries and an improved battery management system.
The M600 Pro is compatible with the entire range of Zenmuse cameras and gimbals. It's ideal for professional cinematographers, aerial photography and industrial applications.
The M600 pro comes with an A3 Pro Flight Controller.
This gives the industrial hexacopter triple redundancy along with algorithms that will help the pilot get accurate diagnostic information in real time.
The dampening system means you'll get absolutely precise control of your M600 pro while it's in the air.
The A3 Pro is also compatible with D-RTK GNSS to help reduce the impact of magnetic interference and give the pilot centimeter-level accuracy.
The M600 Pro comes in a fully built state, meaning the heavy lift UAV can be in the air in a matter of minutes.
The M600 airframe is easy to transport and extremely light, with quick release landing gear and foldable arms.
The Pro also has new GNSS module positions under the upper cover to increase reliability.
A carry case is also included with the M600 pro, making transport a breeze.
The Matrice 600 Pro is designed for industrial use, for inspections, cinematography and more.
The maximum payload is 6kg - meaning a Ronin-MX gimbal and a range of professional cameras will be suitable for this setup.
Support for all the current Zenmuse cameras, including the new Zenmuse Z30, means that the M600 Pro is incredibly versatile when it comes to camera configuration.
Not only that - but the motors have an active cooling system along with a new dustproof design - meaning that you can always rely on your Matrice to battle through the conditions for a long period of time.
The M600 Pro features a similar impressive flight time to that of the original Matrice 600 (32 mins without payload, 18 mins with payload).
The new Pro model also has a 5km long range transmission - meaning it'll handle almost any industrial scenario.
The battery management system allows the UAV to effectively turn all it's batteries on/off with a single touch.
In addition, the 6 batteries supported by the M600 Pro give you peace of mind. If a single battery were to fail during flight, there are still 5 more in reserve to get the Matrice home before any accidents can happen.
|Diagonal Wheelbase||1133 mm|
|Dimensions||1668 mm × 1518 mm × 727 mm with propellers, frame arms and GPS mount unfolded (including landing gear)
437 mm × 402 mm × 553 mm with propellers, frame arms and GPS mount folded (excluding landing gear)
|Package Dimensions||525 mm × 480 mm × 640 mm|
|Weight (with six TB47S batteries)||9.5 kg|
|Weight (with six TB48S batteries)||10 kg|
|Max Takeoff Weight Recommended||15.5 kg|
|Hovering Accuracy (P-GPS)||Vertical: ±0.5 m, Horizontal: ±1.5 m|
|Max Angular Velocity||Pitch: 300°/s, Yaw: 150°/s|
|Max Pitch Angle||25°|
|Max Wind Resistance||8 m/s|
|Max Ascent Speed||5 m/s|
|Max Descent Speed||3 m/s|
|Max Service Ceiling Above Sea Level||
|Max Speed||40 mph / 65 kph (no wind)|
|Hovering Time* (with six TB47S batteries)||No payload: 32 min, 6 kg payload: 16 min|
|Hovering Time* (with six TB48S batteries)||No payload: 38 min, 5.5 kg payload: 18 min|
|Supported DJI Gimbals||Ronin-MX; Zenmuse Z30, Zenmuse X5/X5R, Zenmuse X3, Zenmuse XT; Zenmuse Z15 Series HD Gimbal: Z15-A7, Z15-BMPCC, Z15-5D III, Z15-GH4|
|Flight Control System||A3 Pro|
|Retractable Landing Gear||Standard|
|Operating Temperature||14° Fto 104° F (-10° C to 40° C)|
|Voltage Output||26.1 V|
|Rated Power||600 W|
|Single Battery Port Output Power||100 W|
|Battery Type||LiPo 6S|
|Net Weight||680 g|
|Operating Temperature||14°F to 104° F (-10°C to 40° C)|
|Max Charging Power||180 W|
|Operating Frequency||920.6 MHz to 928 MHz (Japan); 5.725 GHz to 5.825 GHz; 2.400 GHz to 2.483 GHz|
|Max Transmission Distance||FCC Compliant: 3.1 mi (5 km), CE Compliant: 2.2 mi (3.5 km) (Unobstructed, free of interference)|
|Transmitter Power (EIRP)||10 dBm @ 900M, 13 dBm @ 5.8G, 20 dBm @ 2.4G|
|Video Output Port||HDMI, SDI, USB|
|Operating Temperature||14°F to 104° F (-10° to 40° C)|
|Battery||6000 mAh LiPo 2S|
|Battery Type||LiPo 6S|
|Net Weight||595 g|
|Operating Temperature||14° F to 104° F (-10°C to 40° C)|
|Max Charging Power||180 W|